V-belt Gates SPB 3150 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPB 3150 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 3150 MN and any equivalents.
This Gates SPB 3150 MN belt is a narrow wedge V-belt from the Super HC MN series. It is used in industrial drives where a compact, high-capacity belt is needed. Confirm fit by checking the profile, length, and cross-section dimensions against your drive.
The SPB profile and 3150 mm length identify this belt for your application. The belt has a top width of 16.3 mm, a height of 13 mm, and a 40° angle. These dimensions match the pulley groove and the required belt length. Narrow wedge V-belts like this are common in drives where space is limited and higher power transmission is needed compared to classical V-belts.
To confirm fit, compare the marking on your existing belt with the code SPB 3150 MN. Check that the profile is SPB and the length is 3150 mm. Also verify the top width and height match your pulley groove. If the old belt is worn or the marking is unreadable, measure the top width and the outside length to cross-check. The 40° angle is standard for this profile.
When ordering, provide the part number SPB 3150 MN and the quantity needed. If you are replacing multiple belts on the same drive, note that they should be replaced as a set to maintain even tension. For a quote, send the part number and any additional details about your drive or pulley setup. Our team can help confirm the correct belt for your equipment.
Dimensions
- Section
- SPB
- Length
- 3150mm
Frequently asked questions
- What does the SPB profile mean for my drive?
- SPB is a narrow wedge profile. It has a 16.3 mm top width, 13 mm height, and 40° angle. This profile fits pulleys designed for SPB belts. Check your pulley groove dimensions to confirm compatibility.
- How do I confirm the length of this belt?
- The length is 3150 mm. Compare this with the length marked on your existing belt or measure the outside length of the old belt. If the old belt is stretched or damaged, use the part number from the drive documentation.
- Can I use this belt on a drive that currently has a different brand?
- Yes, if the profile and length match. This belt is an SPB profile with a 3150 mm length. Check that your pulleys are designed for SPB belts and that the required length is 3150 mm. If you need help, send us the marking from your old belt.