V-belt Gates SPB 3000 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPB 3000 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 3000 MN and any equivalents.
When you need to replace a narrow wedge V-belt, the marking on the back of the old belt is your most reliable reference. This page covers the Gates SPB 3000 MN from the Super HC MN series, a narrow wedge V-belt with an SPB profile and a 3000 mm length. Use the part number to request a quote and confirm it matches your drive.
The Gates SPB 3000 MN is a narrow wedge V-belt in the SPB profile, with a 3000 mm length. Its cross-section measures 16.3 mm at the top width and 13 mm in height, with a 40-degree angle. These dimensions are consistent with the SPB profile, so the belt is suited to drives that specify this profile and length.
Before ordering, read the marking on the old belt. Look for the profile, the length, and the full part number. The SPB 3000 MN may be shown as SPB 3000 MN or with the series name Super HC MN. If the marking is worn or unreadable, note the drive sheave dimensions and the center distance so we can help confirm the correct belt.
Send the part number SPB 3000 MN by WhatsApp or email to request a quote. Our team can confirm the belt or suggest an equivalent based on the data you provide. For drives using multiple belts, check all belts for wear and replace them as a set.
Dimensions
- Section
- SPB
- Length
- 3000mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the old belt. It should show the SPB profile and a 3000 mm length, along with the part number SPB 3000 MN. If the marking is unclear, measure the top width and height and compare to 16.3 mm and 13 mm.
- What should I send to get a quote?
- Send the part number SPB 3000 MN and the quantity you need by WhatsApp or email. If you have a photo of the old belt marking, that helps us confirm the profile and length.
- Can you help if the old belt marking is worn off?
- Yes. Provide the drive sheave dimensions and the center distance between pulleys. We can use that information to help identify the correct SPB profile belt and confirm the 3000 mm length.