V-belt Gates SPB 1590

GATES SPB 1590 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 1590 and any equivalents.

This Gates Super HC SPB 1590 is a narrow wedge V-belt with an SPB profile and a 1590 mm length. It is used on industrial drives where a compact, high-capacity belt section is required. To match it to the belt being replaced, confirm the profile and length on the old belt.

Start by reading the marking on the back of the belt you are replacing. You need the profile, SPB, and the length, 1590 mm, to match this belt. The SPB profile is a narrow wedge section, and its dimensions here are a 16.3 mm top width, a 13 mm height and a 40° angle. If the old belt shows SPB 1590, this Gates Super HC belt is the direct size to order.

If the marking is worn or missing, measure the top width and the outside length of the old belt and compare them with the figures above. Do not substitute a different profile or length without checking the drive. A belt that is too long, too short or of the wrong section will not sit correctly in the pulley grooves. When you request a quote, send the part number SPB 1590, the quantity and any details from the old belt marking.

Narrow wedge V-belts are commonly used on industrial drives where space is limited and the pulley grooves are cut for the SPB section. Inspect the pulleys for wear or damage before fitting a new belt. If you are replacing more than one belt on the same drive, order the full set so the belts work together as intended.