V-belt Gates SPB 1510 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPB 1510 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 1510 MN and any equivalents.
This Gates SPB 1510 MN is a narrow wedge V-belt from the Super HC MN series. It is used in industrial drives where a compact, high-capacity belt is required, such as pumps, fans, compressors and other driven equipment. Confirm fit by matching the profile and length to your drive.
The belt has an SPB profile, a top width of 16.3 mm, a height of 13 mm and a 40-degree angle. Its length is 1510 mm. These dimensions, along with the part number, allow you to compare it directly with the belt currently on the drive. If the old belt is worn or the marking is unreadable, measure the top width and the outside length, then check the drive pulley groove to confirm the profile.
Narrow wedge V-belts like this SPB 1510 MN are common on drives that need to transmit more power in less space than a classic V-belt. When replacing, inspect the pulleys for wear, alignment and groove condition. If the drive uses multiple belts, replace the full set so the load is shared evenly.
To request a quote, send the part number SPB 1510 MN, the quantity and any details from the belt marking. If you are unsure whether this is the correct belt, include the drive nameplate information or a photo of the existing belt and pulleys. The team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPB
- Length
- 1510mm
Frequently asked questions
- How do I confirm that the Gates SPB 1510 MN fits my drive?
- Check the profile and length against your current belt or drive specifications. This belt has an SPB profile and a length of 1510 mm. Also verify the top width of 16.3 mm and height of 13 mm if you are measuring the old belt.
- What should I send to get a quote for this belt?
- Send the part number SPB 1510 MN, the quantity you need and any marking details from the existing belt. If you want help confirming the fit, include the drive nameplate information or photos of the belt and pulleys.
- Can I replace just one belt on a multi-belt drive?
- It is good practice to replace all belts in a set at the same time. This helps maintain even tension and load sharing across the drive. Inspect the pulleys for wear and alignment before installing new belts.