Poly-V belt Gates PJ 1194
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- Poly-V belts
- Series
- Micro-V
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES PJ 1194 belongs to poly-V belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PJ 1194 and any equivalents.
This page covers the Gates Micro-V PJ 1194, a Poly-V (multi-rib) belt with a PJ profile and a length of 1194 mm. Use it to confirm the belt on your drive before you order. The same size is also listed under Optibelt PJ 1194.
To match this belt to the one being replaced, read the marking on the back of the old belt. Confirm the profile is PJ and the length is 1194 mm. Both values must agree with the belt you are removing. A PJ profile belt will not seat correctly on a drive cut for another profile, and a different length will not tension properly.
If the old marking is worn or unreadable, measure the belt and check the drive. Count the ribs and confirm the profile, then compare the length to 1194 mm. If the drive uses more than one belt, replace the full set at the same time so the load stays even across the ribs.
We carry the Gates Micro-V PJ 1194 for maintenance, engineering and purchasing teams. The same size is also listed under Optibelt PJ 1194. Send the part number and the quantity you need by WhatsApp or email, and we will reply promptly. If you are unsure of the correct belt, send the old marking or a photo of the drive and we can help confirm it or suggest an equivalent.
Dimensions
- Profile
- PJ
- Length
- 1194mm
Frequently asked questions
- How do I confirm the Gates Micro-V PJ 1194 is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. The profile must be PJ and the length must be 1194 mm. If both match, this is the same size.
- What if the marking on my old belt is no longer readable?
- Measure the old belt and inspect the drive. Confirm the profile is PJ and the length is 1194 mm before ordering. If you need help, send a photo of the drive and the old belt by WhatsApp or email.
- Can you help if I need a different belt than the PJ 1194?
- Yes. Send the part number, the profile and the length you need, or the marking from the old belt. We will confirm the correct belt or suggest an equivalent.