Poly-V belt Gates PJ 1150
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- Poly-V belts
- Series
- Micro-V
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES PJ 1150 belongs to poly-V belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PJ 1150 and any equivalents.
The Gates Micro-V PJ 1150 is a Poly-V (multi-rib) belt with a PJ profile and a length of 1150 mm. Before you install it, inspect the drive and the sheaves it runs on.
Look over the sheaves for worn or polished grooves, nicks, and buildup that can wear a new belt. Spin the pulleys and check for play, rough bearings, or misalignment. Confirm the belt path and any tensioner or idler turn freely and sit square to the belt line.
A PJ profile belt at 1150 mm must match the pulley grooves and the drive layout. Check the old belt marking against the part number and length before ordering, and note any damage pattern on the old belt so the same cause is not repeated. The same size is also listed under Optibelt PJ 1150.
For a quote, send the part number, the profile, and the length, plus a photo of the belt back and the drive if you have one. The MR team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- PJ
- Length
- 1150mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheaves for wear, grooves for damage or buildup, and check pulley alignment, bearing play, and that the tensioner and idlers turn freely.
- How do I confirm this is the right belt?
- Match the profile PJ and the length 1150 mm to the old belt marking and the drive. If you are unsure, send the part number and a photo to MR.
- What information do you need for a quote?
- Send the part number, the profile, and the length. A photo of the belt back and the drive helps confirm the correct belt.