V-belt Gates D 90

GATES D 90 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for D 90 and any equivalents.

This Gates Hi-Power II belt is a classical V-belt with a D profile and a length of 2413 mm. The D profile is the cross-section, and the 2413 mm length is the datum length you match to the drive. Use both values when checking a replacement against the belt currently on the machine.

The profile sets how the belt sits in the sheave groove: a D section is a deep, heavy-duty classical V-belt for drives that need more cross-section than lighter sections provide. The 2413 mm length is the second number to verify, because a belt with the same profile but a different length will not tension correctly. Read the marking on the back of the old belt and compare it with D 90 before you order.

If the marking is worn or missing, measure the old belt and confirm the sheave groove matches the D profile. Send the part number D 90, the profile, and the 2413 mm length by WhatsApp or email, and the team will confirm the belt or suggest an equivalent. For drives with multiple belts, replace the full set at the same time so the load stays evenly distributed.

Inspect the sheaves for wear, alignment, and debris while the belt is off. A worn groove or a misaligned drive can shorten the life of a new classical V-belt even when the profile and length are correct. Record the D 90 marking and the 2413 mm length so the next replacement is straightforward.