V-belt Gates D 79
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- D
- Series
- Delta Classic
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES D 79 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for D 79 and any equivalents.
The Gates Delta Classic D 79 is a classical V-belt with a D profile and a 2000 mm length. Before you fit it, inspect the drive so the new belt runs true from the first start.
Check the sheaves for worn grooves, burrs, and buildup. A groove that has worn wider lets the belt sit too deep, so it slips and wears fast even when the belt itself is correct. Look for oil or grease on the sheave faces and clean them. Confirm the sheaves are aligned with a straightedge across the faces; misalignment shortens belt life on any classical V-belt.
With the drive locked out, check the bearings for play and noise, and confirm the shafts turn freely. Set the correct tension after fitting the D 79 belt and recheck it after the first run-in period. If the drive uses more than one belt, fit a matched set and replace all belts at the same time so the load stays shared.
Dimensions
- Section
- D
- Length
- 2000mm
Frequently asked questions
- What do I need to send to get a quote for the Gates Delta Classic D 79?
- Send the part number D 79, the brand Gates, and the quantity you need by WhatsApp or email. If you are unsure of the part number, send the marking on the back of the old belt and photos of the drive.
- How do I confirm this is the right belt for my drive?
- Match the D profile and the 2000 mm length to the belt you are replacing. Check the old belt marking and measure the drive sheaves if the marking is unreadable.
- Should I replace all belts on the drive at once?
- Yes. On a multi-belt drive, fit a matched set and change every belt together so they share the load evenly and wear at the same rate.