V-belt Gates D 280
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- D
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES D 280 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for D 280 and any equivalents.
When you need to replace a belt, the marking on the old belt is your most reliable reference. The Gates Hi-Power II D 280 is a classical V-belt with a D profile and a length of 7188.2 mm. We carry this belt and can help you confirm it matches your drive.
The D profile identifies the cross-section, and the 7188.2 mm length gives you the datum length. These two numbers are what you need to match when selecting a replacement. If the old belt is worn or dirty, clean the back and read the full marking: brand, series, profile, and length. That information ensures you get the correct belt.
The Gates Hi-Power II series is a classical V-belt construction. For drives that use multiple belts, it is good practice to replace all belts in the set at the same time so they share the load evenly. Before installing, inspect the sheaves for wear, rust, or debris, and check alignment. These steps help you get the full service life from the new belt.
To request a quote, send us the part number D 280, along with the quantity you need. If you have the old belt, include a photo of the marking. Our team will confirm the belt and respond promptly by WhatsApp or email.
Dimensions
- Section
- D
- Length
- 7188.2mm
Frequently asked questions
- How do I read the marking on my old belt?
- Look for the brand, series, profile, and length printed on the back of the belt. For this Gates Hi-Power II belt, you should see D 280, which indicates a D profile and a length of 7188.2 mm. If the marking is hard to read, clean it with a cloth and check under good light.
- Can I replace just one belt in a multi-belt drive?
- It is best to replace all belts in the set at once. Belts that have run together wear evenly, and mixing old and new belts can cause uneven load distribution. This helps maintain drive performance and reduces the risk of premature failure.
- What information do I need to request a quote?
- Provide the part number D 280 and the quantity required. If you have the old belt, a photo of the marking can help us confirm the correct replacement. Send this by WhatsApp or email, and our team will reply promptly.