V-belt Gates D 220
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- D
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →GATES and MITSUBOSHI: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES D 220 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for D 220 and any equivalents.
The Gates Hi-Power II D 220 is a classical V-belt with a D profile and a length of 5664.2 mm. Before fitting a new belt, inspect the drive and sheaves so the replacement runs true and wears evenly.
Check sheave grooves for wear, rust, or embedded debris. Worn grooves let the belt sit too deep and slip; damaged groove walls can cut the belt sidewalls. Confirm that sheaves are aligned and that the driven equipment turns freely by hand.
Verify the old belt marking against the drive data. This belt is a D profile, 5664.2 mm long, and the same size is also listed under Stark D 220 and Mitsuboshi D 220. If the drive uses multiple belts, replace the full set at the same time so load is shared evenly.
For a quote, send the part number D 220 and the quantity you need. If you are unsure whether this is the correct belt for your drive, include the belt marking and sheave details, and the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- D
- Length
- 5664.2mm
Frequently asked questions
- What is the profile and length of the Gates Hi-Power II D 220?
- It is a D profile classical V-belt with a length of 5664.2 mm.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Stark D 220 and Mitsuboshi D 220.
- What should I check before fitting this belt?
- Inspect sheave grooves for wear or debris, confirm alignment, and make sure the driven equipment turns freely. On multi-belt drives, replace all belts as a set.