Skip to main content
All products
Gates logo · GATES D 171
V-belt Gates D 171

GATESBrand We Carry

V-belt Gates D 171

Manufacturer part numberD 171Also known as: D171
Brand
GATES
Subcategory
V-belts
Section
D
Series
Hi-Power II
Get a quote for D 171 on WhatsApp

We reply promptly.

Tell us the quantity you need and request a quote by WhatsApp or email.

Other brands for this category

Ask us for alternatives. We check every equivalent against the part number and your application.

DAYCO and GATES: matching part numbers →

Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.

Ask on WhatsAppAsk by email

Description

GATES D 171 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for D 171 and any equivalents.

The Gates Hi-Power II D 171 is a classical V-belt in the D profile with a length of 4470.4 mm. If you are replacing a belt on an existing drive, this page is built around matching the belt you are taking off.

Start with the marking on the old belt. Confirm the profile is D and the length is 4470.4 mm, then check the part number against D 171. The same size is also listed under Dayco D 171, so a Dayco belt with that marking is the same size.

When you send your request, include the part number and the drive it runs on. If the old belt is worn or the marking is unreadable, send a photo of the belt and the pulley grooves so the profile and length can be confirmed before quoting.

For drives that use more than one belt, order the full set so all belts on the drive share the same profile and length. If the drive has been changed or the old belt no longer fits the pulleys, note that in your message so the correct belt can be confirmed.

Dimensions

Section
D
Length
4470.4mm

Frequently asked questions

How do I confirm this is the right belt for my drive?
Check the marking on the belt being replaced. The profile should be D and the length 4470.4 mm. If the part number reads D 171, this is the same size.
What if the old belt marking is gone?
Send a photo of the belt and the pulleys, along with the drive details. The profile and length can be checked against the Gates Hi-Power II D 171 before you order.
Can I use this belt alongside another brand of the same size?
The same size is also listed under Dayco D 171. On a multi-belt drive, replace all belts at the same time so the set matches.
Get a quote for D 171 on WhatsApp
Quote on WhatsApp