V-belt Gates BX 27
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Tri-Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES BX 27 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 27 and any equivalents.
The Gates Tri-Power BX 27 is a cogged classical V-belt with a BX profile and a 762 mm length. This belt is used on industrial drives where a classical V-belt is specified. To confirm fit, match the profile and length to your existing belt.
Cogged classical V-belts like this BX-profile belt are common on drives that need flexibility and heat dissipation. The cogged construction helps the belt run cooler and resist cracking. The BX profile is a classical V-belt cross-section, not a narrow wedge or a synchronous belt.
To confirm fit, check the marking on the back of the old belt. It should show the profile and length. If the marking is worn, measure the top width and the outside length, or compare the belt to a known sample. The part number BX 27 corresponds to a BX profile and a 762 mm length.
When replacing a belt, inspect the sheaves for wear, alignment, and debris. A worn sheave can damage a new belt. If the drive uses multiple belts, replace them as a set to keep tension even. For a quote, send the part number BX 27 and the quantity you need.
Dimensions
- Section
- BX
- Length
- 762mm
Frequently asked questions
- How do I confirm that the Gates Tri-Power BX 27 fits my drive?
- Check the marking on your old belt for the BX profile and 762 mm length. If the marking is not readable, measure the top width and outside length, or compare the belt to a sample. The BX 27 is a cogged classical V-belt with a BX profile and 762 mm length.
- Where is this type of belt used?
- Cogged classical V-belts are used on industrial drives where a classical V-belt is specified. They are often found on drives that need flexibility and heat dissipation. This belt has a BX profile and a 762 mm length.
- What should I send to request a quote?
- Send the part number BX 27 and the quantity you need. If you are unsure about the profile or length, include a photo of the marking on the old belt. Our team can help confirm the right belt or suggest an equivalent.