V-belt Gates BX 25
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Tri-Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES BX 25 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 25 and any equivalents.
This page covers the Gates Tri-Power BX 25, a cogged classical V-belt in the BX profile with a length of 712 mm. Before you fit it, inspect the drive and sheaves so the new belt runs true from the start.
Check sheave grooves for wear, rust, burrs or embedded debris. A worn groove lets the belt sit too deep, so it slips and wears fast even when the belt itself is correct. Confirm the sheaves are aligned and the shafts turn freely. If the old belt failed early, the drive is usually the reason.
Match the marking on the back of the old belt to the part number. This belt is BX profile, 712 mm long, and the same size is also listed under Optibelt BX 25. If the drive uses more than one belt, replace the full set at the same time so the load stays even across all belts.
For a quote, send the part number BX 25, the brand Gates, and the quantity you need. If the belt on the drive is marked differently, send that marking and a photo of the sheaves and we will help confirm the right belt.
Dimensions
- Section
- BX
- Length
- 712mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect sheave grooves for wear, rust, burrs or debris, confirm sheave alignment, and make sure the shafts turn freely. Correcting these points first prevents premature wear on the new belt.
- How do I confirm this is the right belt?
- Read the marking on the back of the old belt. This belt is Gates Tri-Power BX 25, BX profile, 712 mm long. The same size is also listed under Optibelt BX 25.
- What do I send to request a quote?
- Send the part number BX 25, the brand Gates, and the quantity. If the old belt is marked differently, include that marking and a photo of the drive so we can help confirm the right belt.