V-belt Gates B 35 PowerBand
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Hi-Power PowerBand
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES B 35 PowerBand belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for B 35 PowerBand and any equivalents.
This is a Gates B 35 PowerBand belt from the Hi-Power PowerBand series, a banded V-belt with a length of 889 mm. Banded construction ties multiple V-belts together so they run as one unit on multi-groove drives, which helps keep sheave alignment consistent where single belts might slip or flip. Use the B section and the 889 mm length to confirm it matches the belt you are replacing.
Banded V-belts are common on drives with several grooves running in parallel, where matched sets are needed to share the load evenly. The band across the top holds the individual belts at a fixed spacing, so the set stays seated in the sheaves instead of rolling over under shock or pulsating loads.
To confirm fit, read the marking on the back of the belt you are replacing and compare the section and length to this belt. Check that the sheave grooves are clean and free of wear, and that all belts in the drive are replaced together rather than one at a time, so the banded set carries the load as designed.
Dimensions
- Length
- 889mm
Frequently asked questions
- How do I confirm this B 35 PowerBand belt fits my drive?
- Check the belt marking on the drive for the section and length, then match them to this belt's B section and 889 mm length. If the old belt is worn or unreadable, measure the drive sheaves and the center distance and send those details with your quote request.
- Can I replace single V-belts with a banded belt?
- A banded belt is made for drives that use multiple belts in parallel. It keeps the belts at a fixed spacing and helps prevent them from flipping or slipping out of the grooves. Confirm the sheave grooves are in good condition before installing a banded set.
- What should I send for a quote on this belt?
- Send the part number B 35 PowerBand, or the section and length from the back of your old belt, by WhatsApp or email. If you have a photo of the belt marking or the drive nameplate, include it so the team can confirm the right belt or suggest an equivalent.