V-belt Gates B 223
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Hi-Power II
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES B 223 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for B 223 and any equivalents.
When a drive belt needs replacing, the most reliable starting point is the marking on the back of the old belt. This page covers the Gates B 223 Hi-Power II, a classical V-belt with a B profile and a length of 5689.6 mm. Use the numbers on your existing belt to confirm this is the one you need.
The Gates B 223 is a classical V-belt in the Hi-Power II series. It has a B profile, a top width of 17 mm, a height of 11 mm and a 40 degree angle. The length is 5689.6 mm. These are the figures to compare against the marking on the belt you are removing.
Markings can fade or wear away, so check the belt back carefully before ordering. If the old belt is unreadable, measure the outside length and the top width, and note the profile. Send the part number, the profile and the length by WhatsApp or email with your quote request. The team can confirm the belt matches your drive or suggest an equivalent.
For drives that run more than one belt, replace the full set at the same time so the belts share the load evenly. Inspect the sheaves for wear, alignment and debris while the belts are off. A worn sheave can shorten the life of a new belt, so correct any issues before installation.
Dimensions
- Section
- B
- Length
- 5689.6mm
Frequently asked questions
- How do I confirm the Gates B 223 is the right belt?
- Read the marking on the back of the old belt. Compare the part number, profile and length against the B 223. If the marking is gone, measure the outside length and top width and send those details with your quote request.
- What are the dimensions of this belt?
- The Gates B 223 Hi-Power II has a B profile, a top width of 17 mm, a height of 11 mm, a 40 degree angle and a length of 5689.6 mm.
- Should I replace all belts on a multi-belt drive?
- Yes. On a drive with more than one belt, replace the full set at the same time so the load is shared evenly. Also inspect the sheaves for wear and alignment before installing the new belts.