V-belt Gates AX 59
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Tri-Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →DAYCO and GATES: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES AX 59 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX 59 and any equivalents.
The Gates Tri-Power AX 59 is a cogged classical V-belt with an AX profile and a length of 1550 mm. It is built for drives that need a raw-edge cogged belt rather than a wrapped one. Send the part number to get a quote.
To quote the AX 59, include the full marking from the belt: Gates Tri-Power, AX 59, profile AX and length 1550 mm. If the old belt is worn or the marking is gone, measure the outside length and note the cross-section, then send both. Photos of the belt and the drive help us confirm the match.
The same size is also listed under Optibelt AX 59 and Dayco AX 59, so if you are replacing another brand, the AX 59 size is a direct starting point. We carry the Gates Tri-Power AX 59 and can help confirm it is the right belt for your drive. Send the part number by WhatsApp or email and the team will reply promptly.
Check the sheaves for wear, alignment and correct groove profile while the belt is off. On multi-belt drives, replace all belts in the set at the same time so the load stays even. If you are unsure of the profile or length, send the belt marking and we will help you sort it out.
Dimensions
- Section
- AX
- Length
- 1550mm
Frequently asked questions
- What do I need to send to get a quote for the Gates Tri-Power AX 59?
- Send the part number AX 59, plus the profile AX and length 1550 mm if you have them. If the belt is not marked, send the outside length, the cross-section and a photo of the drive.
- Is the AX 59 listed under other brands?
- Yes. The same size is also listed under Optibelt AX 59 and Dayco AX 59. If you are replacing one of those, the AX 59 size is the one to match.
- Should I replace all belts on the drive at once?
- On a multi-belt drive, replace the full set together. Mixing a new belt with worn ones can leave the load uneven across the drive.