V-belt Gates 7M 825
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Polyflex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 7M 825 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 7M 825 and any equivalents.
The Gates Polyflex 7M 825 is a narrow V-belt with an 825 mm length. It is used in drives that require a compact, high-capacity belt. To confirm it fits your application, match the profile and length to the belt you are replacing.
When replacing a belt, start by reading the marking on the back of the old belt. The part number 7M 825 tells you the profile and the length in millimeters. The 825 mm length is the datum length, so measure your old belt or check the drive documentation to ensure it matches. If the old belt is worn or stretched, do not rely on a tape measure alone; use the printed number as your primary reference.
The Polyflex series is a narrow V-belt design, often used where space is limited and higher speeds are required. Because it is a raw-edge, cogged belt, it can run on smaller pulleys than a standard V-belt. The 7M profile indicates a specific top width and height, so it is not interchangeable with other profiles. Always verify that the pulley grooves are compatible with the 7M profile before installing.
If you cannot read the marking or the belt is missing, send us the drive details and we will help you identify the correct replacement. For a quote, provide the part number 7M 825 and the quantity you need. We carry the Gates Polyflex line and can confirm the correct belt for your equipment.
Dimensions
- Length
- 825mm
Frequently asked questions
- How do I match the Gates Polyflex 7M 825 to my old belt?
- Check the marking on the back of the old belt. The profile is 7M and the length is 825 mm. If the numbers match, the belt is the correct replacement. If the old belt is unreadable, measure the outside length and compare it to the 825 mm datum length, or send us the drive information for assistance.
- What does the 7M profile mean?
- The 7M profile is a specific narrow V-belt cross-section. It has a defined top width and height that fit pulleys with matching 7M grooves. Do not substitute a different profile, as it will not seat correctly in the pulley.
- Can I use this belt on any drive?
- This belt is designed for drives that accept a 7M profile and an 825 mm length. It is not suitable for drives that require a different profile or length. Always confirm the pulley groove type and the required belt length before ordering.