V-belt Gates 5VX 1120 PowerBand
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- Quad-Power 4 PowerBand
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 5VX 1120 PowerBand belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5VX 1120 PowerBand and any equivalents.
This is a Gates 5VX 1120 PowerBand banded V-belt from the Quad-Power 4 PowerBand series, with a length of 2845 mm. Banded construction ties multiple V-belts together so they run as one unit on drives that use several belts side by side. It suits maintenance and purchasing teams replacing a worn belt on a multi-belt drive.
Banded V-belts are common on industrial drives where two or more belts share the load, such as fans, pumps, compressors and similar equipment. Because the belts are joined, the set stays matched in length and does not roll into the groove or whip the way single belts can. Confirm the drive takes a banded belt before ordering, and check the belt marking against the part number you need.
To confirm fit, read the marking on the back of the old belt and match the part number, the series and the 2845 mm length. Inspect the sheaves for wear, alignment and debris, and check that the banded belt sits correctly in every groove. If the drive runs a set, replace the full set rather than one belt.
Send the part number, the quantity and a photo of the belt marking by WhatsApp or email to request a quote. If the marking is worn, send the drive details and the team can help confirm the right belt.
Dimensions
- Length
- 2845mm
Frequently asked questions
- How do I confirm this Gates 5VX 1120 PowerBand belt fits my drive?
- Check the marking on the back of the old belt against the part number, the Quad-Power 4 PowerBand series and the 2845 mm length. Also confirm the drive uses a banded V-belt and that the sheave grooves are in good condition.
- Should I replace all belts on the drive at once?
- On a multi-belt drive, replace the full set so the belts stay matched in length and share the load evenly. Replacing one belt alone can leave the others working harder.
- What do I send to request a quote?
- Send the part number 5VX 1120 PowerBand, the quantity you need and a photo of the belt marking. If the marking is not readable, send the drive details and the team can help confirm the right belt.