V-belt Gates 5VP 1320 PowerBand
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Predator PowerBand
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 5VP 1320 PowerBand belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5VP 1320 PowerBand and any equivalents.
The Gates 5VP 1320 PowerBand is a banded V-belt built for drives where multiple V-belts run side by side. The band ties the ribs together so they stay aligned and share the load evenly. This page covers where this type of belt is used and how to confirm it fits your drive.
A banded V-belt is common on high-load, multi-groove drives where a single belt would slip or flip. Typical settings include crushers, mixers, compressors, blowers, and other process equipment that run several V-belts in parallel. The band keeps the ribs from whipping or turning over in the sheave grooves, which helps hold consistent tension across the set.
To confirm fit, read the marking on the back of the old belt and match the part number. Check that the sheave grooves are clean, aligned, and free of wear, and that the belt sits at the correct depth in the groove. This belt is 3350 mm long, so measure the old belt or check the drive layout before ordering. If the marking is worn off, send a photo of the drive and the sheave dimensions for help identifying the right belt.
Banded belts are replaced as a set, not one rib at a time, so all belts on the drive should come from the same production run. Inspect the sheaves for burrs, rust, or grooves worn into the sidewalls, and verify that the take-up has enough travel to tension a new set. When you request a quote, include the part number 5VP 1320 PowerBand and the quantity needed for the full drive.
Dimensions
- Length
- 3350mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Read the marking on the back of the old belt and match it to 5VP 1320 PowerBand. Also check the sheave groove profile and the number of ribs on the drive. If the old marking is gone, measure the outside length and send a photo of the sheave.
- Can I replace just one belt in a banded set?
- No. Banded V-belts are made as a matched set, and the ribs are joined by a band. Replacing a single belt can cause uneven tension and premature wear, so the full set should be replaced at the same time.
- What should I send to get a quote?
- Send the part number 5VP 1320 PowerBand and the quantity you need. If you are unsure of the number, include the belt marking, the sheave dimensions, and a photo of the drive, and we will help confirm the right belt.