V-belt Gates 5V 2650 PowerBand

GATES 5V 2650 PowerBand belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5V 2650 PowerBand and any equivalents.

A banded V-belt ties two or more V-belts together with a common backing, so the ribs stay aligned and share the load across the sheave grooves. This one is the Gates Super HC PowerBand in size 5V 2650, with a length of 6730 mm. The fastest way to order the right one is to read the marking on the back of the belt you are replacing.

Start at the drive and clean the belt back if it is dirty. Write down the full marking as it appears, including the section and the length number. On this belt that reads 5V 2650. Note how many ribs the banded belt has, and check that the replacement carries the same section, length and rib count. If the old belt is worn or the marking is gone, measure the outside length and count the ribs.

Send that marking to us by WhatsApp or email with the quantity you need. We carry the Gates Super HC PowerBand line and can confirm the belt against what you wrote down. If you are unsure whether the belt on the drive is the correct one for the application, send the drive details along with the marking and we will help you check it.

Banded belts run as a set, so inspect the whole drive before you order. Look at the sheave grooves for wear, check the sheaves are aligned, and check the tension on the belts still running. Replace the banded belt as a unit rather than mixing old and new ribs.