V-belt Gates 5V 2500
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and GATES: matching part numbers →GATES and STARK: matching part numbers →GATES and MITSUBOSHI: matching part numbers →GATES and OPTIBELT: matching part numbers →DAYCO and GATES: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 5V 2500 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5V 2500 and any equivalents.
When a drive belt needs replacing, the marking on the back of the old belt is the most reliable starting point. This page covers the Gates 5V 2500, a narrow wedge V-belt with a 5V profile and a length of 2500 mm. Use the steps below to confirm it matches your drive before requesting a quote.
Reading the marking: the back of a worn belt usually carries the profile and length, such as 5V 2500. Check that the profile is 5V and the length is 2500 mm. If the old belt is too worn to read, measure the outside length and compare it to 2500 mm, and note the cross-section dimensions to confirm the 5V profile.
The same size is also listed under Stark 5V 2500, Mitsuboshi 5V 2500, Optibelt 5V 2500, and Dayco 5V 2500. If you prefer to match the brand you already run, provide that part number when requesting a quote. We carry the Gates 5V 2500 and can help confirm the right belt for your drive.
For a quote, send the part number 5V 2500, the quantity, and any details from the old belt marking. If the marking is unclear, include a photo of the belt and the drive. Our team replies promptly by WhatsApp or email and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- 5V
Frequently asked questions
- How do I confirm the belt size from the old belt?
- Look for a marking on the back of the belt. It should show the profile and length, such as 5V 2500. If it is unreadable, measure the outside length and compare it to 2500 mm, and check the cross-section to confirm the 5V profile.
- What should I send to request a quote?
- Send the part number 5V 2500, the quantity you need, and any marking details from the old belt. If the marking is unclear, include a photo of the belt and the drive so we can help confirm the right belt.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Stark 5V 2500, Mitsuboshi 5V 2500, Optibelt 5V 2500, and Dayco 5V 2500. You can request a quote using any of these part numbers.