V-belt Gates 37x1250
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Multi-Speed
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 37x1250 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 37x1250 and any equivalents.
The Gates 37x1250 is a variable speed belt from the Multi-Speed series, listed at a length of 1250 mm. When you are replacing a belt on a variable speed drive, the marking on the back of the old belt is the fastest way to confirm you are ordering the same profile and length. This page covers what to check before you request a quote.
Start with the belt itself. Read the code printed on the back and compare it character for character with 37x1250. Variable speed drives are sensitive to the belt cross-section and length, so a belt that looks close but carries a different code is not the same part. If the old belt is worn, glazed or has lost its marking, check the drive documentation or the machine tag for the original belt callout.
Once you have confirmed 37x1250, send that part number to us by WhatsApp or email. Our team replies promptly and can confirm the right belt for your drive. If you are unsure whether this is the correct replacement, include a photo of the old belt and the drive nameplate with your request, and we will help you verify the match.
Variable speed belts should be inspected as part of routine drive maintenance. Look for cracks, missing sections, glazing on the sidewalls, and uneven wear across the width. A belt that has been running in a misaligned or worn sheave will usually show it. Replacing the belt before it fails keeps the drive running at the speeds it was set up for.
Dimensions
- Length
- 1250mm
Frequently asked questions
- How do I confirm the Gates 37x1250 is the belt I need?
- Read the marking on the back of the belt you are replacing. If it reads 37x1250, that is the part number to request. If the marking is worn off, check the drive documentation or machine tag.
- What information should I send with my quote request?
- Send the part number 37x1250, and if you can, a photo of the old belt and the drive nameplate. That helps us confirm the correct belt before you order.
- What should I look for when inspecting a variable speed belt?
- Check for cracks, missing sections, glazing on the sidewalls, and uneven wear across the width. These signs mean the belt should be replaced.