V-belt Gates 37x1120
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Multi-Speed
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 37x1120 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 37x1120 and any equivalents.
The Gates 37x1120 is a variable speed belt from the Multi-Speed series, with a length of 1120 mm. We carry this belt for maintenance, engineering and purchasing teams that need to replace a worn variable speed drive belt. Before you fit it, take a few minutes to inspect the drive and sheaves.
A variable speed belt wears differently from a standard V-belt because it runs between sheaves that change diameter. Check the sheave faces for grooves, scoring or a step where the belt has been running. Clean the sheave faces and confirm the sheaves move freely through their full range. If the sheaves are worn or sticking, a new belt will not solve the problem.
Measure the old belt and compare it to the 37x1120. The 1120 mm length is the value to match. Look for cracks, missing ribs or a glazed surface on the old belt, and note how it sits in the sheave. A belt that sits too low or too high can point to sheave wear or the wrong profile.
When you request a quote, send the part number 37x1120 and the quantity you need. If you are replacing more than one belt on the same drive, include that in your message. Our team replies by WhatsApp or email and can help confirm the right belt for your application.
Dimensions
- Length
- 1120mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect the sheave faces for wear, scoring or a step, and make sure the sheaves move freely through their full range. Clean the sheaves and check alignment. A worn or sticking sheave will shorten the life of any new belt.
- How do I identify the belt I am replacing?
- Read the marking on the back of the old belt and measure its length. The Gates 37x1120 has a length of 1120 mm. If the marking is worn off, send us the drive details and a photo, and we can help confirm the right belt.
- What information do you need for a quote?
- Send the part number 37x1120 and the quantity you need by WhatsApp or email. If you are replacing belts on a multi-belt drive, let us know how many are on the drive so we can help you match the set.