Timing belt Gates 2450-14MX

GATES 2450-14MX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2450-14MX and any equivalents.

The Gates PowerGrip GTX 2450-14MX is a timing belt in the 14MX profile with a 2450 mm length. Before you fit it, take a few minutes to look over the drive and the sheaves. A new belt on worn or misaligned hardware will not run the way it should.

Start with the sheaves. Check the grooves for wear, corrosion and buildup, and confirm the teeth are not hooked or flattened. Look for oil, coolant or debris that has worked into the drive, and clean it out before the belt goes on. Check shaft bearings for play and roughness, since a loose shaft will pull the belt off line.

Check alignment next. Put a straightedge across the two sheave faces and look for offset or angular error. Confirm the sheaves are tight on their shafts and that the keyways and fasteners are sound. Verify the take-up or tensioner moves freely through its full range and that the mounting bolts hold torque.

Then confirm the belt itself. The 2450-14MX carries the 14MX profile and a 2450 mm length, so read the marking on the back of the old belt and match it before you order. If the drive has more than one belt, replace the set together. Send us the part number by WhatsApp or email and we will confirm the belt or suggest an equivalent.