Timing belt Gates 2450-14MGT
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerGrip GT4
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 2450-14MGT belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2450-14MGT and any equivalents.
The Gates PowerGrip GT4 2450-14MGT is a timing belt with a 14MGT profile and a 2450 mm length. To match it to the belt being replaced, read the marking on the back of the old belt and confirm the profile and length against this page.
The profile is the first check. The 14MGT profile must match the pulleys and the belt you are removing; a different profile will not seat correctly. The second check is the length: 2450 mm. The pitch is 14 mm. Confirm these three values against the old belt's marking before ordering.
When the marking is worn or unreadable, count the teeth or measure the old belt and compare the result with the profile and length above. If the drive uses more than one belt, replace the full set so the load stays even across the pulleys. Inspect the pulleys for wear or damage at the same time.
We carry the Gates PowerGrip GT4 2450-14MGT. Send the part number, the quantity, and a photo of the old belt's marking by WhatsApp or email, and our team will confirm the belt or suggest an equivalent.
Dimensions
- Profile
- 14MGT
- Pitch
- 14mm
- Length
- 2450mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the profile and length on the back of the belt being replaced. They should match the 14MGT profile and 2450 mm length shown for this Gates PowerGrip GT4 belt. The pitch is 14 mm. If the marking is not clear, send a photo and we will help confirm it.
- What should I send to request a quote?
- Send the part number 2450-14MGT, the quantity you need, and any details from the old belt's marking. A photo of the back of the belt helps us confirm the profile and length. We reply by WhatsApp or email.
- Should I replace more than one belt at a time?
- If the drive uses multiple belts, replace them as a set so they share the load evenly. Check the pulleys for wear or damage while the belts are off.