Timing belt Gates 2000-8MGT
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerGrip GT4
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 2000-8MGT belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2000-8MGT and any equivalents.
The Gates PowerGrip GT4 2000-8MGT is a timing belt with an 8MGT profile, a 2000 mm length and an 8 mm pitch. When you need to match a belt being replaced, these three values are what you compare against the old belt and the drive.
Start with the marking on the back of the belt you are removing. Confirm the profile reads 8MGT, the length reads 2000 mm and the pitch reads 8 mm. If the old belt is worn or the marking is gone, measure the length and count the teeth to verify the pitch before ordering.
The 2000-8MGT is a synchronous belt, so it must match the sprocket groove profile and the center distance of the drive. A belt with the same length but a different profile will not seat correctly. Check that the sprockets are not worn and that the flanges are not damaged before installing a new belt.
Send the part number 2000-8MGT by WhatsApp or email to request a quote. If you are unsure of the profile or length, include photos of the old belt marking and the sprockets so we can help confirm the right belt.
Dimensions
- Profile
- 8MGT
- Pitch
- 8mm
- Length
- 2000mm
Frequently asked questions
- How do I confirm the 2000-8MGT is the right belt for my drive?
- Compare the profile, length and pitch on the old belt marking to 8MGT, 2000 mm and 8 mm. If the marking is unreadable, measure the length and count the teeth to verify the pitch.
- What should I send to request a quote for this belt?
- Send the part number 2000-8MGT by WhatsApp or email. If you need help confirming the belt, include photos of the old belt marking and the sprockets.
- Can I replace a belt of the same length but a different profile with this one?
- No. The profile must match the sprocket groove. A belt with the same length but a different profile will not seat correctly in the drive.