V-belt Gates 13x800
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Multi-Speed
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 13x800 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13x800 and any equivalents.
The Gates Multi-Speed 13x800 is a variable speed belt with an 800 mm length, built for drives that change speed while running. Before you fit a new belt, inspect the drive and sheaves, since worn or misaligned sheaves will shorten the life of any belt you install.
On a variable speed drive, the belt runs between sheaves that open and close to change the effective diameter. Check the sheave faces for grooves, steps, scoring or a polished band where the belt has been running. Look for wobble, end play or a sheave that no longer moves freely through its full range. If the sheave faces are worn, a new belt will seat poorly and wear quickly.
Measure the old belt and compare it against the Gates Multi-Speed 13x800. Confirm the profile and the 800 mm length match what the drive was built for. On multi-belt drives, replace the full set so all belts carry the same load. After fitting, check alignment and tension, then run the drive through its speed range and recheck.
For a quote, send the part number 13x800 along with the belt marking, the quantity you need and a photo of the drive if you have one. Our team replies by WhatsApp or email and can help confirm the right belt for your application.
Dimensions
- Length
- 800mm
Frequently asked questions
- What should I check on the sheaves before installing this belt?
- Inspect the sheave faces for wear, grooves or a polished band, and check that both sheaves move freely through their full range. Also check alignment and end play. Worn sheaves will damage a new belt quickly.
- How do I confirm the 13x800 is the right belt for my drive?
- Compare the profile and the 800 mm length against the belt you are replacing. If the markings do not match, send us a photo of the old belt and the drive, and we can help confirm the correct belt.
- Should I replace all belts on the drive at the same time?
- Yes. On a multi-belt drive, replace the full set together so the load is shared evenly. Mixing a new belt with worn belts can cause the new belt to carry more than its share and fail early.