FAG 61819-2RSR-Y deep groove ball bearing
- Brand
- FAG
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding FAG 61819-2RSR-Y
- 618Series
- Deep groove ball bearings, 618 series. Series differ in outside diameter and width even when the bore is the same.
- 19Bore
- Bore 95 mm (19 × 5).
- 2RSR-YSuffix
- FAG suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
61819 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
FAG 61819-2RSR-Y measures 95 mm across the bore and 120 mm across the outside diameter; its width is 13 mm (95 x 120 x 13 mm).
FAG 61819-2RSR-Y belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 61819-2RSR-Y and any equivalents.
Extra-thin-section deep groove ball bearings make up the FAG 618 series with 2RSR seals and a Y cage. They take radial and axial loads in either direction, and because the section is so slim they fit into compact housings where axial room is tight. The sealed design suits areas with dust or moderate humidity. MR Industrial Accessories supplies this line and can help you match the right size to your application.
Reading the code tells you most of what you need. The base number, for example 61809, sets the series and the size, and a larger number means a larger bore. The 2RSR suffix means elastomer seals sit on both sides, holding grease in and keeping contaminants out. A Y at the end indicates a sheet steel cage for moderate-speed duty. So 61810-2RSR-Y is a 618 series bearing, sealed on both faces, with a standard cage.
Where radial and axial space is limited, these bearings turn up in small electric motors, precision gearboxes, instrumentation, textile machinery, medical equipment and automation devices. Fans, low-power centrifugal pumps and light transmission mechanisms also use them. Low noise at high speed is another reason they appear in test benches and laboratory equipment that call for smooth, steady rotation.
Selection comes down to the radial and axial load, the speed of rotation and the surrounding conditions. Choose the 2RSR seal when dust, chips or humidity are present; if you need less friction or higher speed, an open or shielded version may be the better fit. At mounting, verify alignment between shaft and housing, keep direct blows away from the balls, and confirm the fit so the rings are not deformed. Because the seals hold the lubricant in place, normal service needs no extra maintenance.
Replacements often cross over between brands, and the same size can carry different designations from one maker to another. What counts is keeping the bore, outer diameter and width, plus the seal type, unchanged. You can search by dimensions or by the letters that identify seal and cage. Our team can point you to a suitable alternative among the brands we supply.
For a quote on a FAG 618 series deep groove ball bearing with 2RSR seals and a Y cage, send the complete part number or your equipment dimensions on WhatsApp or by email. We answer promptly and can suggest equivalents or help you choose.
Dimensions
95 x 120 x 13 mm (d x D x B): boundary dimensions for basic designation 61819, according to ISO 15.
- Bore
- 95mm
- Outside diameter (D)
- 120mm
- Width (B)
- 13mm
SKF and other brands, same size
Other brands' pages with basic designation 61819: 95 x 120 x 13 mm (d x D x B) per ISO 15.
- Need the SKF 61819? We can also quote:61819-2RZ61819-2RS161819-2RS1/C31 more →
- RKB61819
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- FAG 61819-2RSR-Y bearing: what are its dimensions?
- FAG 61819-2RSR-Y measures 95 mm across the bore and 120 mm across the outside diameter; its width is 13 mm (95 x 120 x 13 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 61819.
- What does the 2RSR suffix mean on a FAG bearing?
- It means the bearing carries elastomer seals on both sides. The seals keep grease in and block dust, water and particles, which helps in dirty environments.
- Can the 618 series handle axial loads?
- Yes. These deep groove ball bearings take moderate axial loads in both directions along with radial loads. For heavier axial duty, other arrangements should be reviewed.
- How do I request a quote for a bearing that is not listed?
- Send the full part number or the bore, outer diameter and width on WhatsApp. With those details we can identify the equivalent and get back to you promptly.