Bearing 61819, dimensions 95 x 120 x 13 mm: SKF, FAG, and RKB part numbers
The MR catalog lists 8 bearing part numbers with boundary dimensions 95 x 120 x 13 mm (d x D x B), from 3 brands: SKF (4), FAG (3), and RKB (1). Each part number in the tables links to its product page, so you can request a quote via WhatsApp or email. If you are looking for the 61819 bearing dimensions, they are 95 x 120 x 13 mm: the tables below list every part number with those boundary dimensions.
Deep groove ball bearings 95 x 120 x 13 mm
8 part numbersBrowse all deep groove ball bearings →
They are all the same bearing type: deep groove ball bearings (8 part numbers, series 618).
2 of the 8 part numbers are the basic designation alone, without a suffix. The most frequent suffixes, with the number of part numbers they appear in: Y (3), 2RS1 (2), 2RZ (2), 2RSR (1), and C3 (1).
These are boundary dimensions according to ISO 15, in millimetres: d is the bore, D the outside diameter and B the width.
Two bearings with the same size are not necessarily the same bearing: the type, the seals or shields, the internal clearance, the cage and the load rating depend on the designation, the suffix and the brand. That is why we quote by part number: send us the full part number shown on the bearing, the box or the drawing, or the size together with the variant you need.
If the part number can no longer be read, measure the bore, the outside diameter and the width, and look the size up in the bearings-by-size index: each size has its own page with all its part numbers.
Size charts by series
Every size in each series, in that brand's chart:
Looking for a 95 x 120 x 13 mm bearing?
Tell us the complete part number, or the size plus the variant you need, and the quantity. We'll send a quote by WhatsApp or email.