DODGE P2B-SCUEZ-104S-PCR pillow block bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCUEZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE P2B-SCUEZ-104S-PCR belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-SCUEZ-104S-PCR and any equivalents.
The DODGE SCUEZ series Y-bearing pillow block is a foot-mounted unit that arrives pre-assembled with a cast iron housing and an insert ball bearing. It is ready to bolt to a structure, so there is no need to fit the insert on site. This design supports drive shafts in equipment that needs smooth rotation and straightforward mounting.
The part number is built in segments. The letter P designates the housing style, the following number gives the size, and the letters B and S describe the body and insert arrangement. SCUEZ points to the insert bearing series, including its sealing and locking suffixes, while the final PCR segment refers to the housing finish or variant. For example, P2B-SCUEZ-104S-PCR combines size, series and suffix in one code.
Typical applications include belt conveyors, packaging lines, mixers, screens, fans and milling equipment, as well as water treatment, food processing and metalworking operations. These are moderate-speed, mainly radial-load duties. Because the unit is foot-mounted, it can be fastened to stringers, frames or sheet metal bases without machining the housing.
Selection depends on shaft diameter, load type and operating environment. The insert seal determines whether the unit handles dust, water or frequent washdowns. Shaft locking may be by set screws or adapter sleeve, depending on the load. During installation, set the base on a flat surface, align both units on the shaft and tighten the locking screws evenly to prevent insert distortion.
Interchange between brands is based on shaft size and housing configuration, but always check center height, hole spacing and locking method before replacing. The DODGE SCUEZ series has equivalents in other Y-bearing pillow block lines, and compatibility depends on those dimensions, not just the diameter. If space is tight, wall-mount or flange-mount units with the same insert are also considered.
If you have the pillow block part number, send it by WhatsApp or email for a prompt quote. If you need a shaft, seal or locking variant not shown, contact us with the model or measurement and we will suggest a compatible alternative.
Dimensions
- Número de producto
- 127503
- Bore
- 1-1/4 in
Frequently asked questions
- What does SCUEZ indicate in a Y-bearing pillow block?
- SCUEZ identifies the insert bearing series inside the housing. The letters that follow in the part number specify the seal type and shaft locking. Send us the full part number and we will confirm the variant for your equipment.
- How do I decide between a pillow block and a flange-mount unit?
- It depends on how the shaft is supported. A pillow block fastens to a horizontal surface or stringer; a flange-mount unit bolts to a vertical face or panel. Tell us the shaft position and available space, and we will help you choose.
- Can a DODGE pillow block replace one from another brand?
- Often yes, but you must compare center height, base hole spacing and shaft diameter. With those dimensions we will identify the compatible DODGE unit and quote it.