DODGE INS-SXRH-55M-E insert bearing

DODGE INS-SXRH-55M-E belongs to insert bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for INS-SXRH-55M-E and any equivalents.

The SXRH-E line from Dodge consists of ball inserts with an extended inner ring, made to sit inside split plummer block housings as well as wall and hanger units. They suit shafts that need to turn with proper alignment in assemblies that can be opened up on site. MR Industrial Accessories LLC supplies this line and handles quote requests by WhatsApp or email using the complete part number.

Reading the code helps when ordering. The letters SXRH point to the Dodge family of inserts built for mounted housings. The digits after them give the shaft diameter in millimeters, while the M confirms a metric size and the closing E marks the series variant. Different shaft diameters are covered across the range.

Typical duty includes belt conveyors, bucket elevators, mixers, screens and packaging lines, along with water treatment equipment, animal feed plants and agricultural machinery. Maintenance crews in chemical, food and cement operations favor the split housing design because it lets them swap the bearing without pulling the shaft or shutting down the transmission.

Selection comes down to three things: shaft diameter, housing style and the sealing the surroundings call for. Dusty or wet areas justify an insert with a reinforced seal, while clean duty is fine with a standard seal. During installation, verify housing alignment, apply lubricant according to the duty cycle and torque the inner ring set screws as specified so the raceway is not distorted.

Inserts for mounted housings can often be swapped between brands by shaft number and locking type, yet inner ring width, locking thread and sealing differ from one maker to another. Compare the complete part number and the housing dimensions before substituting. A Dodge housing keeps the original interface with an SXRH-E insert; with a housing from another brand, our team can point you to a compatible option.

Whether you are replacing an insert or assembling it with its housing, send the part number over WhatsApp along with the shaft number and a photo of the housing. Our team replies promptly with a quote for the Dodge SXRH-E insert bearing or a suitable equivalent.