DODGE FC-DL-110L piloted flange bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- DL
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE FC-DL-110L belongs to piloted flange bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for FC-DL-110L and any equivalents.
The DODGE DL series Y-bearing unit is a piloted flange mounted bearing that supports and guides rotating shafts where the mounting surface is flat. The flange centers the assembly, and mounting holes secure it to the frame. Common in conveyors, agitators, blowers and process machinery, it allows the insert to be replaced without removing the housing.
The DL series part number follows a simple logic: initial letters denote the housing type, and the shaft diameter is given in hundredths of an inch. For instance, FC-DL-110L is a piloted flange housing for a 1 1/8 inch shaft. The L suffix indicates the insert locking version. Understanding this structure helps you order the correct replacement without depending on outdated catalogs.
These units appear in belt and screw conveyors, mixers, centrifugal fans, pumps and packaging lines. In food, chemical and aggregate plants, they handle dust, humidity and frequent washdowns. The piloted flange simplifies mounting on sheet metal or cast iron and helps maintain shaft alignment, which is critical where misalignment accelerates insert wear.
Selection depends on shaft diameter, locking type and insert sealing. In dusty or wet environments, a lip or double lip seal is recommended; in high-temperature areas, use a suitable grease. During installation, rest the flange on a clean, flat surface, tighten screws in a cross pattern and verify the shaft turns freely. Periodic lubrication and careful alignment extend assembly life.
Piloted flange mounted bearings are offered by several brands with their own nomenclatures. Interchangeability depends on shaft diameter, hole spacing and insert locking type. An equivalent from another brand with the same critical dimensions can be used. MR Industrial Accessories can suggest a compatible alternative.
To request a quote for the DODGE DL series Y-bearing unit, send the part number FC-DL-110L or the shaft and flange dimensions via WhatsApp or email. The team replies promptly and helps you define the best option for your equipment.
Dimensions
- Número de producto
- 128814
- Bore
- 1-5/8 in
Frequently asked questions
- How do I identify the part number of the housing I need?
- The part number combines housing type, shaft diameter in hundredths of an inch and locking suffix. For example, FC-DL-110L is a piloted flange for a 1 1/8 inch shaft. If you lack the part number, provide the shaft diameter and hole spacing.
- Can it be replaced by another brand?
- Yes, if shaft diameter, flange hole spacing and insert locking system match. Many brands offer equivalents with standardized dimensions. Send us the data and we will indicate a compatible alternative.
- What lubrication is advisable for this housing?
- Use the grease recommended by the insert manufacturer and follow the frequency for your working conditions. In dusty or humid environments, shorten the intervals. If the housing has a seal, check it is not damaged during greasing. We can advise based on your application.