DODGE FC-DL-108 piloted flange bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- DL
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE FC-DL-108 belongs to piloted flange bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for FC-DL-108 and any equivalents.
The FC-DL from DODGE is a piloted flange mounted bearing that combines a housing with an insert bearing from the DL series. It supports rotating shafts where the flange bolts from the front and the pilot centers the unit, and it can be installed or removed without taking apart the surrounding assembly. This makes it a practical choice for low to medium duty transmissions that need built-in lubrication and sealing against moderate dust or moisture.
The code breaks down into three parts. FC stands for the piloted flange. DL identifies the insert bearing series, which is also called D-Lok because of how it locks onto the shaft. The number at the end gives the shaft size in inches. For instance, FC-DL-102 fits a 1.1/8" shaft, while FC-DL-111 fits a 1.7/16" shaft, as listed in the series table. Suffixes can point to different seals or housing materials, so share the full code when you need the exact configuration.
You will find these units on belt conveyors, bucket elevators, mixers, mills, centrifugal pumps, and other process equipment in food, chemical, and aggregate plants. The piloted flange simplifies mounting onto sheet metal or cast iron with four bolts, and the insert bearing absorbs small misalignments. To pick the right housing, consider the shaft diameter, whether the load is radial, axial, or combined, and the site conditions. In dusty, wet, or frequently washed-down areas, a reinforced seal is worth considering.
During installation, the flange must sit on a flat surface and the pilot must center in the housing. Taking care with alignment helps the bearing last. Most inserts come lubricated for life, though some can be greased periodically. DODGE DL series housings can interchange with other piloted flange mounted bearings that use the same shaft and hole pattern. When you request a quote, compare the shaft diameter, the distance between bolt centers, and the locking method—set screw, eccentric, or taper.
If you have the housing code or the shaft diameter, send it to us on WhatsApp or by email. We can also help you choose the right seal or lubrication for your application.
Dimensions
- Número de producto
- 128813
- Bore
- 1-1/2 in
Frequently asked questions
- What does FC-DL mean in this housing?
- FC indicates the piloted flange, and DL is the insert bearing series. The final number is the shaft diameter in inches. For example, FC-DL-102 is for a 1.1/8" shaft. The series is also known as D-Lok for its locking system.
- How can I tell if this housing replaces the one I already have?
- Check the shaft diameter, the distance between the flange holes, and the shaft locking type. If they match, it is compatible. If you are not sure, send us a photo or the equipment code and we will identify the alternative.
- Does the insert bearing need maintenance?
- Most inserts in the DL series are lubricated for life and do not need periodic greasing. In very dirty environments or with washdowns, inspect the seal and replace the insert if you notice lubricant loss or noise.