DODGE F4B-SCEZ-25M-PCR flange bearing 4 holes

DODGE F4B-SCEZ-25M-PCR belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F4B-SCEZ-25M-PCR and any equivalents.

This mounted unit pairs a cast iron flange housing with a sealed, pre-lubricated insert ball bearing. It bolts to a flat surface to support a shaft where secure fastening and straightforward alignment matter. MR Industrial Accessories supplies the DODGE SCEZ line for power transmission applications across the United States and Latin America.

Break the part number into its blocks to order the right replacement. F4B tells you it is a 4-bolt flange. SCEZ is the insert series, which sets the insert geometry and sealing. The number in the middle gives the shaft size. The PCR suffix defines the housing and mounting variant. Reading the code this way lets you identify the unit without a photo or a measurement taken while the machine is down.

You will find these units on belt conveyors, bucket elevators, mixers, exhaust fans, packaging belts, and process lines. They suit food plants, cement operations, meat processing, tanneries, and aggregate facilities where dust, moisture, or washdowns are common. The 4-bolt flange mounts to sheet metal or structural profiles. The insert bearing handles minor misalignment, so the housing does not need precision machining.

Selection depends on shaft diameter, load type, and the environment. The insert seal determines how much contamination the unit can take; for water or fine dust, choose the variant with greater protection. Make sure the flange sits flat, tighten the four bolts evenly, and slide the shaft in without hammering. The bearing arrives lubricated, but in service check lubrication based on running hours and operating temperature. Careful alignment at mounting helps the insert last.

Flange units from different brands interchange by shaft number and housing type, not by the full part number. Equivalent series may vary in center height, hole diameter, or sealing, so confirm interchangeability by comparing those dimensions. If the equipment uses a DODGE SCEZ unit, the simplest approach is to repeat the series and shaft size. If the original brand is unknown, look for a compatible alternative with the same mounting dimensions.

To replace a flange bearing unit, send the part number from the housing or the part itself via WhatsApp and we will quote it. If the number is unreadable, send the shaft diameter and the distance between the flange holes, and we will identify a compatible alternative. MR Industrial Accessories works with the DODGE mounted bearing unit line and the sizes used in US and Latin American industry.