DODGE F4B-SCEZ-010L-PCR flange bearing 4 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCEZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F4B-SCEZ-010L-PCR belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F4B-SCEZ-010L-PCR and any equivalents.
The DODGE SCEZ series 4-bolt flange Y-bracket is a mounted bearing unit that pairs a cast iron housing with an insert ball bearing. The assembly arrives pre-aligned and ready to bolt onto a flat surface with four fasteners. It suits applications that call for a rigid, centered shaft support.
The part number tells you what you are ordering. Take F4B-SCEZ-008L-PCR: F4B means the housing is a 4-bolt flange; SCEZ is the insert bearing series; 008L is the shaft size code, which corresponds to a nominal inch diameter; and PCR denotes a finish or sealing variant. F4B-SCEZ-010L-PCR and F4B-SCEZ-110L-PCR follow the same pattern with different size codes. The complete part number is what you need to provide.
These brackets are common on belt conveyors, bucket elevators, mixers, screens, mills and process equipment in food, chemical and aggregate plants. They also appear on industrial fans, centrifugal pumps and packaging lines, where the 4-bolt pattern allows symmetrical mounting on plate or structure. Typical use involves moderate loads and medium shaft speeds.
When selecting a bracket, consider shaft diameter, load type (radial, axial or combined) and the operating environment. The insert seal determines whether the unit handles dust, water or frequent washdowns. Lubrication is applied at the factory, but a relubrication schedule should be set based on temperature and speed. During installation, the flange must sit on a clean, flat surface; tighten the four bolts in a cross pattern with a torque wrench. Verify shaft alignment before startup.
Several brands offer 4-bolt flange brackets with insert bearings under their own part numbering. Interchangeability is not automatic: you must compare shaft diameter, hole spacing, center height and insert locking type. The DODGE SCEZ series has its own geometry, so if the part number does not match, send the dimensions or the original part number and we will identify a compatible alternative. We do not recommend replacements that do not match dimensionally.
To request a quote for a DODGE SCEZ series 4-bolt flange Y-bracket, send the complete part number by WhatsApp to MR Industrial Accessories. With F4B-SCEZ-008L-PCR, F4B-SCEZ-010L-PCR or F4B-SCEZ-110L-PCR we will respond promptly. If your part number is not listed, write to us with the model or dimensions and we will assist.
Dimensions
- Bore
- 5/8 in
Frequently asked questions
- What does the part number F4B-SCEZ-008L-PCR mean?
- F4B indicates a 4-bolt flange housing; SCEZ is the insert bearing series; 008L refers to the shaft size; and PCR is a finish variant. This complete code identifies the exact unit for ordering.
- How do I know if this bracket replaces the one I have mounted?
- Compare the shaft diameter, the distance between flange holes, the center height and the insert locking type. If those match, the replacement is viable. Send us the original part number and we will confirm.
- Can the insert bearing be relubricated?
- Yes, most inserts in this series allow relubrication. Frequency depends on speed, temperature and environment. In dusty or wet conditions, shorten intervals and use the appropriate grease.