DODGE F2B-SXR-200L-FF flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SXR
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F2B-SXR-200L-FF belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-SXR-200L-FF and any equivalents.
The DODGE SXR series flange unit is a mounted Y-bearing assembly. A cast iron flange housing holds a sealed, self-aligning ball insert. It bolts to a flat face and supports a shaft where minor angular misalignment is expected. Installation and removal are straightforward, which suits conveying and power transmission equipment.
Read the code in sections. F means flange housing; 2B tells you how many mounting holes and how they are arranged. SXR is the insert family, covering its seals and shaft locking method. The three digits that follow, as in F2B-SXR-200L-FF, point to the shaft size, and the L suffix marks the locking variant. The FF ending describes the unit's sealing.
These units are common on belt conveyors, bucket elevators, screens, mixers, fans and packaging lines, and in food, cement, aggregate and water treatment plants where moisture or dust is present and a flange support must be easy to replace. Because it is a mounted unit, no housing machining or bearing fitting is needed.
When selecting, confirm shaft diameter, radial and axial loads, and the shaft locking type the insert accepts. FF sealing fits fine dust or splash conditions; for frequent washdown, check seal material and lubrication. Mount the flange on a flat, rigid surface, tighten bolts in a cross pattern, and align the shaft first. The insert handles slight angular misalignment only; it is not a fix for a mounting error.
For interchangeability, compare shaft diameter, hole pattern, center height and locking type. Across brands, the same shaft size can differ in center-to-center distance and sealing, so cross-reference the full designation rather than the shaft number alone. If the existing equipment uses another brand, send the part number and flange dimensions and we will identify the compatible DODGE option.
MR Industrial Accessories LLC supplies the DODGE line and manufactures split plummer block housings, ANSI roller chains and sheaves. For this Y-bearing or another SXR variant, message us on WhatsApp or email with the part number, such as F2B-SXR-200L-FF, the shaft diameter and a photo of the flange. Our team replies promptly and can suggest equivalents and help you choose.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does F2B-SXR-200L-FF indicate?
- F is the flange housing; 2B is the number of mounting holes. SXR is the insert family, the three digits give the shaft size, L is the locking variant, and FF is the sealing type.
- How do I find the right shaft size?
- Measure the shaft where the insert mounts and match it to the number in the designation. If the old unit is another brand, send the old part number and flange dimensions on WhatsApp and we will point to a compatible alternative.
- Can I install it on my existing structure?
- Yes, if the flange sits flat and the holes line up with the center-to-center distance. Tighten the bolts in a cross pattern and align the shaft before final tightening. The insert takes up minor angular misalignment but does not replace proper alignment.