DODGE F2B-SCAH-008L flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCAH
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F2B-SCAH-008L belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-SCAH-008L and any equivalents.
A DODGE SCAH series 2-bolt flange Y-bearing is a mounted unit that combines a ball insert with a flange housing, holding a rotating shaft against a flat surface through two mounting holes. It suits equipment where space is tight and the bearing must be self-aligning and simple to swap out, including conveyors, agitators, blowers and process machinery. MR Industrial Accessories supplies this series to customers in the United States and Latin America.
Reading the code helps you order the right unit. The first block describes the housing: F for flange, 2 for the number of bolt holes, B for housing type. The SCAH block identifies the insert series, and the L at the end is the closing suffix. The digits in the middle change with shaft diameter, as in F2B-SCAH-008L, F2B-SCAH-010L and F2B-SCAH-110L. That is why the complete code matters when you ask for a quote.
These flange units turn up in belt conveyors, mixers, exhaust fans, screens and packaging lines, and also in water treatment, food processing and metalworking operations. Because the flange bolts directly to sheet metal or structural steel, no machined housing seat is needed. Compared with pillow block or take-up designs, a flange unit can make assembly and replacement more straightforward.
Selection comes down to shaft diameter, load type and the surrounding conditions. Where dust or moisture is present, the insert seal becomes the deciding factor; where there is slight misalignment, the mounted bearing's built-in clearance helps absorb it. At installation, set the flange on a clean, flat surface, tighten the bolts in a cross pattern and lubricate for the duty cycle. Good alignment pays off in insert life.
On equivalences: 2-bolt flange housings with ball inserts can be swapped between makers when shaft diameter, hole spacing and flange dimensions line up. A similar series name is not enough; compare the full code and the mounting dimensions. For a replacement, send the code stamped on the housing or the flange measurements.
To request a quote for a DODGE SCAH series 2-bolt flange Y-bearing, message us on WhatsApp with the complete code, such as F2B-SCAH-008L, or with the shaft and flange measurements. Our team replies promptly and, if you need a variant that is not listed, we will review it with you and suggest a compatible alternative.
Dimensions
- Bore
- 1/2 in
Frequently asked questions
- What does the designation F2B-SCAH-008L mean?
- F stands for flange, 2 for the number of mounting holes and B for the housing type. SCAH is the insert series and L is the final suffix. The middle number, such as 008, 010 or 110, indicates the shaft diameter. Always provide the full code when requesting a quote.
- How do I choose the right housing for my equipment?
- Check the shaft diameter, the distance between the flange holes and the load type. Also consider whether the environment has dust, water or high temperature, since that determines the insert sealing. With those details we can point you to the option that fits your needs.
- What care does mounting require?
- Set the flange on a clean, flat surface, tighten the bolts in a cross pattern and verify shaft alignment. Lubricate the insert according to the duty cycle and check tightness from time to time. Careful mounting reduces vibration and extends bearing life.