DODGE F2B-SCAH-008 flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCAH
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE F2B-SCAH-008 belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2B-SCAH-008 and any equivalents.
This 2-bolt flange bracket is a mounted unit that pairs a cast iron housing with a DODGE SCAH series insert ball bearing. Two bolts fasten it to a flat surface, so it supports and guides shafts where a compact, rigid mount is needed, with straightforward alignment and low upkeep.
The part number breaks down into clear sections. The F2B prefix shows a 2-bolt flange design, SCAH names the bracket series, and the last three digits give the shaft size. For instance, F2B-SCAH-008 fits a shaft of 8 units, while F2B-SCAH-100 uses hundredths of an inch. Common sizes include F2B-SCAH-010, F2B-SCAH-012, F2B-SCAH-014, F2B-SCAH-015, F2B-SCAH-101 and F2B-SCAH-102. To order, just provide the full part number or the shaft diameter you need.
You will find these brackets on conveyors, belts, elevators, mixers, blowers and process equipment in food, chemical, cement and aggregate plants. The 2-bolt flange mounts directly to sheet metal or structural steel, so no housing machining is required. When the insert bearing wears, replacement is quick, which keeps maintenance time and cost down.
Selection depends on shaft diameter, load type (radial, axial or combined) and the operating environment. The insert seal guards against dust and moisture; in washdown areas, check the seal type carefully. Internal clearance and lubrication are set at the factory. During installation, verify flange alignment to avoid parasitic stresses, and tighten both bolts firmly and evenly.
Interchangeability: 2-bolt flange brackets with insert bearings from other brands can replace this one if mounting dimensions, shaft diameter and fastening type match. A similar part number is not enough—compare hole spacing, hole diameter and overall height. For existing equipment, send the original part number or measurements and we will identify a compatible alternative from DODGE or another brand we supply.
To request a quote for a DODGE SCAH series bracket, message us on WhatsApp with the full part number (for example, F2B-SCAH-012) or the shaft diameter. We can also advise on variants with a different seal type or special configuration. MR Industrial Accessories serves customers across the United States and in several Latin American countries, and we reply promptly with technical information and your quote.
Dimensions
- Bore
- 1/2 in
Frequently asked questions
- What does SCAH mean in this bracket?
- SCAH identifies the series of the 2-bolt flange bracket with insert bearing. The F2B prefix indicates the flange type and the final digits the shaft diameter. It is a DODGE nomenclature specific to this product line.
- How do I determine the shaft size I need?
- Measure the shaft diameter where the insert bearing mounts. Part numbers such as F2B-SCAH-008 or F2B-SCAH-100 indicate different sizes. If unsure, send us the old bracket's part number or the measurements and we will help identify it.
- Can another brand replace it?
- Yes, if the mounting dimensions match: distance between holes, their diameter, overall height and shaft diameter. A similar part number alone is not enough. Consult us with the original part number and we will indicate a compatible alternative.