DBH 9889 radial shaft seal — 32 x 57 x 10

DBH 9889 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9889 and any equivalents.

The DBH 9889 is a radial shaft seal with an Lx lip design, sized for a 32 mm shaft, a 57 mm housing bore, and a 10 mm width. It keeps lubricant in and contaminants out on rotating shafts, and the secondary dust lip adds protection where dust or splash is present. MR Industrial Accessories supplies this seal and helps you match it to your equipment.

The code 9889 identifies this seal within the DBH line. In the Lx configuration, a main sealing lip handles fluid retention while a second lip excludes dust and particles; both sit in a metal case with an outer coating. The lip compound is chosen to resist mineral oils and greases, but actual fluid and temperature compatibility should be confirmed for each application.

Typical installations include gearboxes, centrifugal pumps, electric motors, conveyor rollers, and spindles. You will also find it on agricultural and construction machinery and on process lines running at moderate shaft speeds. The dust lip makes it a practical choice where chips or splashes are present. If the shaft is worn or the housing is damaged, review alternatives before fitting a standard seal.

Selection starts with confirming that the shaft and housing match the original dimensions. The shaft should be ground to the proper hardness; scratches or wear will shorten lip life. The housing bore must be clean, free of burrs, and deep enough for the 10 mm width. Lubricate the lip with the service oil or grease and use a proper installation tool to avoid cutting the seal. For high speed or high temperature, ask about FKM or a more resistant NBR.

To find an equivalent to the DBH 9889, send the code 9889 along with the shaft, housing, and width measurements, and a photo of the original seal if you have one. We can also check other brands or lip styles to suit your application. MR Industrial Accessories supplies the DBH brand and provides technical guidance so you get the right part.

For a quote on the DBH 9889, message us on WhatsApp with the code. We also manufacture split plummer block housings, ANSI chains, and sheaves, and we distribute bearings, bushings, lubricants, and mounting tools.