DBH 9887Vit radial shaft seal — 35.5 x 58 x 11.3/19
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9887Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9887Vit and any equivalents.
A rotary shaft lip seal, the DBH 9887Vit keeps lubricant inside the housing and keeps dust, water and particles out. The code 9887Vit covers a shaft of 35.50 mm, a bore of 58.00 mm and a height between 11.30 and 19.00 mm, the exact figure depending on the A 331 design. Maintenance and purchasing teams specify it for gearboxes, pumps, motors and other rotating equipment where leaks have to be controlled and bearings and gears protected.
Reading the code helps when you compare it against a worn part. The 9887Vit number stands for this size family: shaft 35.50 mm, housing 58.00 mm, width 11.30 to 19.00 mm. The A 331 design refers to how the lip and the outer case are built, which can include an auxiliary lip or a specific geometry for tougher sealing conditions. Confirm all three measurements on the old seal before ordering.
You will find this seal in gearboxes, centrifugal pumps, electric motors, compressors and power transmission equipment. In each case it holds oil or grease in place and blocks dust, water and particles from reaching the bearings, which helps the assembly last. It suits shafts running at moderate speeds where lubrication has to stay reliable.
Fitting is straightforward if you check a few points first. Match the shaft and housing diameters to the dimensions above, remove burrs from the shaft and make sure its surface is hard enough to avoid wearing the lip early. Coat the lip with the same oil or grease the equipment uses, then press the seal in squarely, without hitting it directly. A worn housing can be handled with a repair sleeve.
If you need a replacement or a cross-reference, send the 9887Vit code, the shaft and housing dimensions, and a photo of the original seal when you can. Our team reviews the details and comes back with equivalents in other brands or configurations that suit the application.
Dimensions
- Shaft (d)
- 35.5mm
- Housing bore (D)
- 58mm
- Height (h)
- 11.30/19.00mm
- Design
- A 331
Frequently asked questions
- What size is the DBH 9887Vit seal?
- Shaft 35.50 mm, housing 58.00 mm, and a height of 11.30 to 19.00 mm depending on the A 331 design. These figures come from the manufacturer's technical data.
- Where is this seal typically used?
- On rotating shafts in gearboxes, pumps, electric motors and transmission equipment. It retains lubricant and excludes contaminants, protecting bearings and gears at moderate speeds.
- How do I ask for a quote or an equivalent?
- Message us on WhatsApp or by email with the 9887Vit code or your seal dimensions. For an equivalent, include the shaft and housing sizes and, if possible, a photo of the original seal.