DBH 9672Vit radial shaft seal — 35 x 47 x 5.6
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9672Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9672Vit and any equivalents.
The DBH 9672Vit is a radial shaft seal designed to keep lubricant in and contaminants out where a shaft turns inside a housing. It is a single-lip seal with a retaining spring, identified by the A 156-R design. Typical uses include gearboxes, pumps, motors and other rotating equipment that needs reliable sealing.
The seal measures 35.00 mm at the shaft, 47.00 mm at the housing and 5.60 mm in height. These three dimensions determine whether it will seat correctly, so confirm them against your equipment before ordering. The A 156-R code indicates a single-lip configuration with a spring.
You will find this size in gearboxes, centrifugal pumps, electric motors, compressors, mixers and belt or chain drives, as well as in machine tools, industrial washers and conveying systems. In every case, the seal separates the lubricated side from the outside environment.
During installation, inspect the shaft for burrs or marks in the contact area and make sure the housing is clean and undistorted. Apply the same oil or grease used in the equipment to the lip, then press the seal in with a flat driver to avoid twisting. If the shaft is worn, a repair sleeve may be needed. Selection depends on speed, temperature and the fluid being sealed.
For a seal equivalent to the 9672Vit, provide the full code, the shaft, housing and height dimensions, and a photo or sample of the old seal. With that information we can search for a match within the lines we supply. We can also help determine whether the A 156-R design is correct for your application.
To request a quote for the DBH 9672Vit, send the code by WhatsApp to MR Industrial Accessories. If you are unsure about the designation, series or material, include an image of the seal and caliper measurements. We will respond with the option that best fits your machine.
Dimensions
- Shaft (d)
- 35mm
- Housing bore (D)
- 47mm
- Height (h)
- 5.60mm
- Design
- A 156-R
Frequently asked questions
- What are the dimensions of the DBH 9672Vit oil seal?
- The DBH 9672Vit has a shaft diameter of 35.00 mm, a housing diameter of 47.00 mm and a height of 5.60 mm. The design is A 156-R. Compare these dimensions with your equipment before ordering.
- How do I know if this seal replaces the one I have installed?
- Measure the shaft diameter, the housing bore and the width of the old seal with a caliper. If they match 35.00 x 47.00 x 5.60 mm, the DBH 9672Vit is a candidate. If not, send us the dimensions and we will look for an alternative.
- Does MR Industrial Accessories sell DBH products?
- DBH is a brand that MR supplies. To confirm the code 9672Vit or an equivalent, send us the details by WhatsApp and we will reply with the option we can offer.