DBH 9671Vit radial shaft seal — 98 x 110 x 8.5

DBH 9671Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9671Vit and any equivalents.

A radial shaft seal from the DBH line, the 9671Vit keeps lubricant where it belongs and keeps contaminants out. Its lip rides on the shaft while its outer casing sits in the housing bore, closing the gap between the two. With a 98 mm shaft, a 110 mm housing and an 8.50 mm width, plus the A 285-R design, it suits rotating equipment where dirt and splash are part of daily operation. MR Industrial Accessories supplies this brand and will confirm the size with you before quoting.

The 9671Vit code identifies this seal, and A 285-R identifies its design. Shaft 98 mm, housing 110 mm, width 8.50 mm. A large shaft paired with a thin cross-section like this usually means the assembly has little room along the axis, so the seal has to do its job in a narrow band. Oil or grease is held on the inside; dust, water and particles stay on the outside.

Typical homes for this seal include gearboxes, pumps, electric motors, line shafts and process equipment that turns for long stretches. You will also find it on conveyors, farm machinery and wash or cooling systems where spray reaches the housing. In all of these, the seal protects the bearings and gears behind it, which is what keeps the assembly running instead of being pulled for repair.

Before ordering, compare all three dimensions against the part you are replacing. Look at the shaft as well: a smooth, burr-free surface is what lets the lip sit correctly. During installation, coat the lip, press the seal in squarely to the shaft axis and apply force evenly rather than at one point. Where vibration or heat is heavy, it is worth asking whether another lip compound would serve better.

Quoting the 9671Vit is straightforward. Send the 9671Vit code, or the shaft, housing and width figures together with a photo of the old part. From there we can match an equivalent in the DBH line or in another brand we carry. If the A 285-R geometry turns out not to fit your setup, we will tell you and point you toward a different lip or casing style.

MR Industrial Accessories supplies the DBH brand. Send the 9671Vit code through WhatsApp or email and our team will come back with a quote and any technical guidance you need. We can also help you choose seals in other sizes from the same category.