DBH 9664Vit radial shaft seal — 64 x 80 x 9
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9664Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9664Vit and any equivalents.
The DBH 9664Vit is a radial shaft seal built to hold lubricant in place around a rotating shaft. With a 64 mm shaft, an 80 mm housing bore and a 9 mm height, it fits gearboxes, pumps and motors where oil or grease has to stay in and dust has to stay out. MR Industrial Accessories supplies it within its industrial seal range.
This seal comes from the DBH line under the reference 9664Vit. Read the code against the three published measurements: shaft 64 mm, housing 80 mm, height 9.00 mm. The A 278-R design identifies a single lip with a spring, a common choice for rotating shafts that run with permanent lubrication. Vit is generally linked to compounds with high thermal and chemical resistance, so confirm the exact material against the manufacturer's product page when you request your quote.
Seals in this size range show up in gearboxes, centrifugal pumps, electric motors, rollers and transmission equipment. The job is the same in every case: hold the lubricant inside the assembly and block particles, water or steam from getting in. They also serve as a barrier on bearings and bushings that operate in dusty or damp conditions.
Before fitting one, inspect the shaft for burrs or marks and make sure the sealing surface is polished. Apply lubricant to the lip, then drive the seal in with a support tube that presses on the metal edge rather than the lip. Where the housing has a shoulder, keep to the correct seating depth. Shaft speed, working temperature and the fluid being retained all influence which compound you need.
For an equivalent, send the code 9664Vit along with the shaft, housing and height measurements and the fluid type. A photo of the old seal or the housing drawing also helps. We then review options within the DBH line or from other brands we carry, keeping to the tolerances of your assembly.
Dimensions
- Shaft (d)
- 64mm
- Housing bore (D)
- 80mm
- Height (h)
- 9.00mm
- Design
- A 278-R
Frequently asked questions
- What are the dimensions of the DBH 9664Vit oil seal?
- Shaft 64 mm, housing 80 mm and height 9.00 mm. Compare those three figures with your assembly before ordering.
- Where is this oil seal typically used?
- On rotating shafts in gearboxes, pumps, motors and transmission equipment. It retains oil or grease and keeps dust, water and particles out. Speed, temperature and the working fluid determine the final selection.
- How do I request a quote or an equivalent for the 9664Vit?
- Send the code 9664Vit and the quantity by WhatsApp or email. For an equivalent, add the shaft, housing and height dimensions plus the fluid type, and we will reply with the options.