DBH 9609Vit radial shaft seal — 114 x 135 x 13
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9609Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9609Vit and any equivalents.
When a rotating shaft needs its lubricant kept in and outside contamination kept out, the DBH 9609Vit radial oil seal fits the job. It uses the LMx-R lip design with metal reinforcement, and its size class covers medium to large equipment: shaft 114 mm, housing 135 mm, height 13.00 mm. MR Industrial Accessories supplies this brand within its seals and oil seals range and answers quote requests with the exact code.
The 9609Vit is a dynamic seal, so it works only where the shaft turns inside the housing. The three numbers to match on your machine are 114 mm at the shaft, 135 mm at the bore and 13.00 mm of height. The LMx-R designation describes a sealing lip built on a metal case, shaped to hold oil on a rotating shaft. Treat it as a replacement part, not a static gasket.
You will find seals in this size class on gearboxes, centrifugal pumps, mills, mixers and power transmission equipment, as well as industrial fan shafts. In every case the seal does two jobs at once: it keeps grease or oil inside the housing and blocks dust and water from reaching the bearing area.
Before fitting a new seal, inspect the shaft surface for burrs, scoring or deep marks in the lip contact zone, and make sure the housing bore is clean and not deformed. Lubricate the lip, then press it in squarely using a tube or driver of the right diameter. Direct hammer blows on the metal case are not acceptable. Selection also depends on the lubricant, shaft speed and operating temperature, so confirm those values if you are unsure.
If you are looking for an alternative, send the code 9609Vit together with the shaft, housing and height readings taken from the machine. A photo of the removed seal or the housing drawing works just as well. With that information the team can review options in the DBH line and in other brands it carries, and confirm which one matches your equipment.
MR Industrial Accessories stocks the DBH brand as part of its seals and oil seals offering. For a seal on running equipment, send the code and dimensions by WhatsApp or email and the team will reply with a quote.
Dimensions
- Shaft (d)
- 114mm
- Housing bore (D)
- 135mm
- Height (h)
- 13.00mm
- Design
- LMx-R
Frequently asked questions
- What size is the DBH 9609Vit oil seal?
- It is listed as 114 mm shaft diameter, 135 mm housing diameter and 13.00 mm height. Check your machine if it differs by even a few tenths of a millimeter before installing.
- How can I get a quote for the 9609Vit seal?
- Send the code 9609Vit by WhatsApp or email, along with the shaft, housing and height dimensions of your equipment if you have them. The team will reply with the quote.
- Does the LMx-R design suit high speed or high temperature?
- The LMx-R design is made for rotating shafts that need lubricant retained. Actual performance depends on shaft speed, operating temperature and the oil used; those figures are not part of the item data, so it is best to confirm them with us before specifying it for a demanding application.