DBH 9608Vit radial shaft seal — 88 x 108 x 10

DBH 9608Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9608Vit and any equivalents.

The DBH 9608Vit is a radial shaft seal that sits in the housing and works against a turning shaft, holding lubricant in and keeping dust, water and particles out. In the Lx-R-AH design, a sealing lip is combined with a metal case that adds rigidity and keeps the seal centered. Gearboxes, pumps, electric motors and power transmission equipment rely on this kind of seal to protect bearings and gears. MR Industrial Accessories supplies it within its line of seals and oil seals.

The part carries the DBH brand and the code 9608Vit. Shaft 88.00 mm, housing bore 108.00 mm, height 10.00 mm. The Lx-R-AH configuration means a lip seal with a reinforced body, shaped to hold lubricant on one side. The lip presses lightly against the shaft, while the outer diameter stays seated in the housing so the seal does not turn or leak around its edge.

You will find this type of seal wherever a rotating shaft has to be separated from oil or grease and from the surrounding environment: gearboxes, centrifugal pumps, electric motors, reducers and machine tools. It also appears in power transmission assemblies, such as housings and bearings, where it shields the raceway and helps the assembly last. Shaft speed, temperature and the lubricant in use all influence the choice.

When fitting a radial shaft seal, inspect the shaft for burrs or marks that could cut the lip, and make sure the housing is clean and undistorted. Press the seal in with a proper tool, keeping the force even on the outer diameter and never on the lip. Lubricate the lip with the same oil or grease it will retain before you slide it into place. On a worn shaft, an auxiliary lip may be the better option. Shaft-to-housing alignment matters, since misalignment is a common cause of early leakage.

If you need a seal equivalent to the 9608Vit, send the code plus the shaft, bore and height measurements, and a photo of the old seal if you have one. With that information we can search for an alternative in the DBH line or among the other brands we supply, and advise on the design that suits your lubricant and operating speed. The more precise the data, the faster we locate the part.

To request a quote for the DBH 9608Vit, message us on WhatsApp with the code. Our team handles technical inquiries and helps identify the right seal for your equipment. If the code is not at hand, send the shaft and housing dimensions instead. We can also guide you on selection and installation of industrial seals and oil seals.