DBH 9560 radial shaft seal — 40.5 x 62 x 5
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9560 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9560 and any equivalents.
The DBH 9560 is a radial shaft seal built to keep lubricant in and contaminants out where a shaft passes through a housing. Its Ls configuration combines a metal case with a single sealing lip, and the 5 mm height suits cavities with limited axial room. MR Industrial Accessories supplies this line and can verify the size against your measurements before you order.
Reading the reference is straightforward: 9560 is the size code within the DBH range, and the dimensions behind it are a 40.5 mm shaft, a 62 mm housing bore and a 5.00 mm overall width. The Ls design means one sealing lip in a metal outer case, a common choice for oil- or grease-lubricated rotating shafts. Quote the 9560 code together with the quantity you need.
You will find seals of this type in gearboxes, pump shafts, electric motor bearings, mixers, conveyors and other power transmission assemblies, as well as in machine tools and in agricultural or road machinery. The requirement is always the same: a rotating shaft, a lubricated cavity and a machined housing bore that accepts the seal.
Installation decides how long the seal lasts. The shaft should be clean, free of burrs and free of marks, with a sealing surface of suitable hardness and roughness. Coat the lip with lubricant before pressing the seal in, keep it square to the shaft, and apply force through a tube or press on the outer edge rather than on the lip. Where the housing has a shoulder, seat the seal to the correct depth so it does not sit crooked.
When you request a quote, the shaft, housing and height measurements are the key data, and a photo of the old seal or of the housing helps confirm the profile. From there MR can look for an equivalent in the DBH line or in another brand the company supplies, matching tolerances and design. If your original part carries an extra lip or a spring, mention it and the team will advise accordingly.
To get a quote for the DBH 9560, send the code 9560 and the quantity through WhatsApp or by email. If the size is uncertain, forward your measurements first and the team will check them against the manufacturer's data before moving ahead.
Dimensions
- Shaft (d)
- 40.5mm
- Housing bore (D)
- 62mm
- Height (h)
- 5.00mm
- Design
- Ls
Frequently asked questions
- What size is the DBH 9560 oil seal?
- It fits a 40.5 mm shaft in a 62 mm housing bore with a 5.00 mm width, and it uses the Ls design: a single lip in a metal case. Confirm these three values on your equipment before ordering.
- How can I tell whether the 9560 seal fits my machine?
- Measure the shaft at the point where the lip runs, the inner diameter of the housing bore and the depth available. If they read 40.5 mm, 62 mm and 5 mm, the 9560 is the size you need. A photo of the removed seal also helps confirm it.
- Is there an alternative if I need a different brand?
- Yes. Send the dimensions and a description of how the machine runs, and MR will look for an equivalent with the same dimensions and lip type. Quotes are handled through WhatsApp or email.