DBH 9510/85 radial shaft seal — 26 x 37 x 7/8

DBH 9510/85 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9510/85 and any equivalents.

For rotating shafts, the DBH 9510/85 radial shaft seal keeps lubricant in and contaminants out. It fits a 26 mm shaft, a 37 mm housing, and has a height of 7.00/8.00 mm. The Lx design denotes a single sealing lip with an internal spring and a metal outer case that presses into the housing. This seal is used in gearboxes, pumps, electric motors, and transmission equipment. MR Industrial Accessories supplies this brand and can help you select the right seal for your application.

This radial shaft seal carries the DBH designation 9510/85. The dimensions are: shaft diameter (d) 26 mm, housing diameter (D) 37 mm, and height (h) 7.00/8.00 mm. The Lx design refers to a single sealing lip and a construction that accommodates certain housing tolerances. The lip, typically made of elastomer, runs against the rotating shaft and stays in contact through the force of an internal spring. The outer metal case is press-fitted into the housing.

Typical uses include gearboxes, centrifugal pumps, electric motors, compressors, and power transmission equipment. In these applications, the seal retains oil or grease and blocks dust, water, and other particles. It is common in industrial machinery, agricultural equipment, and vehicles. Its compact size suits tight spaces where reliable sealing is needed.

Before installation, confirm that the shaft and housing are clean and free of burrs or scratches. Apply the same oil or grease used in the application to the lip. Press the seal in perpendicular to the shaft using an installation tube that contacts the metal case, not the lip. Verify that the installation height matches the 7.00/8.00 mm dimension. If the shaft is worn, consider a seal with the lip in a different position or a repair sleeve.

To find an equivalent oil seal, contact MR Industrial Accessories and provide the code 9510/85 or the dimensions 26x37x7/8. You can also supply the shaft and housing dimensions, the fluid type, and the operating conditions such as temperature, speed, and pressure. With that information, the technical team can suggest a suitable alternative from the brands we carry.

To request a quote, send the code 9510/85 by WhatsApp or email to MR Industrial Accessories. The team replies promptly. If you have questions about installation or selection, our technical team can assist.