DBH 9509/85 radial shaft seal — 45 x 60 x 7/8

DBH 9509/85 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9509/85 and any equivalents.

The DBH 9509/85 is a radial shaft seal built for rotating shafts. It keeps lubricant where it belongs inside the housing and blocks dust, water and other contaminants from getting in. Its measurements are shaft 45 mm, housing 60 mm and height 7.00/8.00 mm, in an Lx lip design with a spring that maintains steady pressure on the shaft. MR Industrial Accessories supplies this brand and supports customers with technical guidance.

You will find this seal under the DBH code 9509/85. The Lx configuration pairs a sealing lip with a spring, so contact on the shaft stays constant through operation. The elastomer body resists demanding service, and the metal case allows the seal to be pressed squarely into the housing bore. This is the kind of component that keeps rotary systems sealed and running clean.

Common installations include gearboxes, pumps, electric motors, reducers and power transmission assemblies. Agricultural machinery, construction equipment and hydraulic circuits also rely on seals like this one to hold oil or grease in and keep bearings protected. The design suits shafts turning at moderate to high speeds when mounting tolerances and operating conditions are respected.

When selecting a replacement, confirm that your shaft and housing measurements match the published figures. The shaft diameter has to sit within the recommended tolerance, otherwise leaks or early wear can appear. A smooth, hardened shaft surface with the right roughness helps the lip seat properly. Lubricate the lip with the same oil or grease used in the equipment, press the seal in perpendicular to the shaft and avoid hitting the sealing lip.

If you are looking for an equivalent, get in touch. We can suggest alternatives with similar dimensions or from other brands we carry. To do that, send the original code, the exact dimensions or a photo of the part. We can also help you pick the lip material, nitrile, Viton or another option, based on the fluid being retained and the working temperature.

To request a quote for the DBH 9509/85 or to ask about other sizes, send the code 9509/85 on WhatsApp or by email. We also handle seal kits, special seals and other industrial components. Tell us what you need and our team will get back to you promptly.