DBH 9500Pol radial shaft seal — 17 x 28 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9500Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9500Pol and any equivalents.
The DBH 9500Pol is a radial lip seal sized for shafts of 17 mm, housings of 28 mm, and a width of 7 mm. It keeps lubricant in and contaminants out, helping bearings and bushings last longer in rotating equipment. Installation is a press fit into the bore, with the flexible lip riding on the shaft to accommodate slight misalignment. This seal is a direct replacement in many industrial and agricultural machines.
This seal uses an Lx-R-H configuration: a sealing lip, a reinforced case, and a garter spring. The 9500Pol code identifies the size and construction within the DBH series. It suits permanently lubricated rotating shafts in gearboxes, pumps, and compact motors.
Common applications include small gearboxes, centrifugal pumps, electric motors, drive shafts, and tillage implements. The seal keeps oil or grease inside and blocks dust and moisture from reaching nearby bearings. It also works in machine tools and process equipment where leak-free lubricant containment is critical.
Before ordering, verify the shaft diameter is within tolerance and the housing bore is free of burrs or scratches. Mount the seal square and apply even pressure without hitting the lip. Lubricate the lip with the equipment's oil and position the spring toward the fluid being retained. If the shaft shows wear, consider a seal with an extra lip.
Send the part number 9500Pol with the shaft, housing, and width dimensions, or a photo, to request a quote. Our team checks the designation against the manufacturer's data sheet to confirm the exact size. We can also help select the lip type and elastomer based on the fluid and operating temperature.
DBH is a brand supplied by MR, and we can quote any code in its oil seal line. Contact us via WhatsApp or email with the code 9500Pol and quantity. We will respond with the best fit for your equipment after confirming the technical data sheet.
Dimensions
- Shaft (d)
- 17mm
- Housing bore (D)
- 28mm
- Height (h)
- 7.00mm
- Design
- Lx-R-H
Frequently asked questions
- What size is the DBH 9500Pol oil seal?
- It fits a 17 mm shaft, a 28 mm housing bore, and is 7 mm wide. The Lx-R-H design is confirmed against the manufacturer's data sheet before quoting.
- How can I get a quote for this seal?
- Send the code 9500Pol by WhatsApp or email with your shaft, housing, and width dimensions. Our team will verify the exact size and respond with options.
- What should I check before installing a 17 x 28 x 7 mm seal?
- Make sure the shaft and bore are clean and free of burrs. Lubricate the lip, press the seal in squarely, and place the spring toward the fluid side for proper sealing.