DBH 9493/85 radial shaft seal — 35 x 47 x 7

DBH 9493/85 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9493/85 and any equivalents.

The DBH 9493/85 is a radial shaft seal that keeps lubricant where it belongs and keeps dust and water out of equipment with a turning shaft. Its A 221 design and its measurements — 35 mm at the shaft, 47 mm at the housing and 7.00 mm of height — suit gearboxes, pumps and electric motors. MR Industrial Accessories supplies this seal and helps you confirm it is the right one for the job.

This seal carries the DBH brand and the designation 9493/85. Shaft 35 mm, housing 47 mm, height 7.00 mm. The A 221 design is a single lip with a spring, which holds lubricant in and keeps contaminants out on a rotating shaft. It is a routine replacement item wherever dynamic sealing matters, since a worn seal leads to lubricant loss and early wear on nearby parts.

You will find a seal of this type in gearboxes, centrifugal pumps, electric motors, compressors and conveyor rollers. In each case the shaft turns inside a fixed housing, and the seal separates the lubricated side from the outside. Equipment running at moderate speeds and at temperatures within the normal range for standard elastomers is where this seal is most often used.

Installation is straightforward if you prepare the surfaces first. The shaft and housing should be clean, with no burrs or marks. Put a light film of the same oil or grease the equipment uses on the lip, then press the seal in square to the shaft, applying force on the outer edge rather than the lip. If the shaft is worn, a seal with the lip set in a different position is worth considering. Speed, temperature and the fluid being retained all affect the choice.

When you need an equivalent or another size, send the code 9493/85 or the three measurements of the seal you are replacing. With that information we can check the same DBH line or another brand we carry. We can also tell you whether the A 221 design fits your application or whether a different lip type or material would serve you better.

To get a quote for the DBH 9493/85, message us on WhatsApp with the code or the dimensions. Our team replies promptly with the technical details you need to make the replacement correctly.